How to Use Coptrol to Control Algae in Golf Courses and Greens
Algal scum can cause chronic problems on greens, especially those with poor air circulation, compacted soils and wet areas. Algal growth is encouraged by extended periods of rainy, overcast and warm weather. Algal scums slow water infiltration, keep thatch wet for extended periods, and impede oxygen and other gas diffusion into and out of soils. As well as the danger of blocking watering systems, algae can affect the appearance of the ornamental ponds on courses.
Coptrol will not harm turf on fairways, tees or greens.
|If algae is a problem in your greens or in your water source follow this method to keep your waters clear and bright.|
First identify the algae present . Please use our guide here for more information. This page explains common algae within Australia.
Now calculate the volume of water to treat. Ignore depths below 1 metre. Please refer to our “Quantities“ page which explains the methods used to determine the amount of water to treat.
To calculate the amount of Coptrol needed. An easy way to calculate is:
a) If you are using run-off water from the environment
b) If you are using treated effluent
Dilute the required amount of Coptrol using a 1:10 or even a 1:20 Coptrol water dilution.
The best application method is by spraying. Apply on a sunlit wind free day when algae first appear. If this is impractical, please refer to our “Application” page on how to apply Coptrol.