The volume and/or surface area of the water body should be calculated before treating with Coptrol. You can do this by using the total surface area or volume of the water body. To improve the calculation, you can input both the surface area & the volume.

*Use this calculation tool as a guide to calculate the amount of Coptrol to be used. However, please consult the label for directions.

Calculate How much Coptrol to Apply

Please input your info:


and / or

Your calculated amount of Coptrol Required:



OR USE OUR SHAPE CALCULATORS:

If you do not know the Surface Area or Volume of your water body, please select one of the following shapes to calculate:

Application Rates

The Coptrol application rate depends on the degree of algae infestation, the kinds of algae present & the depth of water to be treated.

For Tanks & Troughs: 
Apply 2 to 5 mL Coptrol per 1,000 litres of water to be treated.

For Dams, Ponds and Water Impoundments, including potable water storages: 
Apply 4.2 to 8.4 litres of Coptrol per 1,000 square meters of water surface area at an average water depth of 1 meter or greater, or 5 to 10L of Coptrol per 1 mega-litre of water.

SAFETY INSTRUCTIONS

Not to be used for any purpose or in any manner contrary to the product label, unless authorised under appropriate legislation.

WITHHOLDING PERIOD NOT REQUIRED WHEN USED AS DIRECTED.

GENERAL INSTRUCTIONS: 
COPTROL will eliminate a broad range of algae and control the growth of resistant species in various situations.

INSTRUCTIONS:
Treat shoreline areas first to avoid trapping fish in shallows. In ponds containing fish, treat only 1/3 of the area at a time to avoid oxygen depletion of the water caused by decaying vegetation.Allow 10-15 days for oxygen levels to recover before continuing treatment.

PROTECTION OF FISH, LIVESTOCK, WILDLIFE & OTHERS:

1. FISH:
This product may be toxic to trout and other species of fish, depending on water hardness. DO NOT treat water containing trout if the water is soft, ie: the carbonate hardness of the water is lower than 50 ppm. DO NOT treat if water temperature is below 16 degrees Celsius.

Treated waters cannot be discharged into rivers, streams, creeks, billabongs, lakes or wetlands without a licence from the Environmental Protection Authority.

2. PLANTS:
Water treated with this product will not adversely affect plants and may be used immediately to water fairways, putting greens and ornamental plants.

Treated waters cannot be discharged into rivers, streams, creeks, billabongs, lakes or wetlands without a licence from the Environmental Protection Authority.

3.OTHER:
Swimming or fishing will not be affected by water treated with this product.

4. DO NOT treat dams used for drinking purposes by sheep grazing on RAGWORT.

5. DO NOT use on areas where large numbers of waterfowl are foraging on filamentous algae.

View the SDS/MSDS here.